Buick Envision 2015 23237, 902 fabricante de Sección de orientación de aluminio de calidad

Tipo: Sección de gestión
Lzsk: Tipo LZ - ty324
Capacidad de oferta: Cien mil al mes
Color: Negro, blanco o Personalizado
Puertos:Shanghai o Ningbo
Raciones mínimas iniciales:51.
Material:Aluminio
Modelo:Vieques.

Descripción del producto
The aluminum steering knuckle is one of the important parts in the steering axle of the Buick Envision car, which can make the car run stably and sensitively transmit the driving direction. The function of the steering knuckle is to transmit and bear the front load of the car, support and drive the front wheel to rotate around the king pin to turn the car. In the driving state of the car, it is subjected to variable impact loads, therefore, it is required to have high strength. The steering knuckle is the hinge for turning the wheels, and is generally fork-shaped. The upper and lower forks have two coaxial holes for installing the kingpin, and the steering knuckle journal is used to install the wheel. The two lugs of the pin hole on the steering knuckle are connected with the fist-shaped parts at both ends of the front axle through the king pin, so that the front wheel can deflect a certain angle around the king pin to turn the car. In order to reduce wear, a bronze bushing is pressed into the steering knuckle pin hole, and the bushing is lubricated by the grease nipple installed on the steering knuckle. In order to make the steering flexible, a bearing is installed between the lower ear of the steering knuckle and the fist part of the front axle. An adjustment pad is also installed between the upper ear of the new steering knuckle and the fist-shaped part to adjust the gap therebetween.

Aluminum Steering Knuckle for BUICK ENVISION

Información detallada

Fabricante de equipo original no.

Lzsk Nº LZ - ty324

CocheEquipo: para el modelo: Vieques Envision

Año: 2015

Tipo: Sección de direcciónSección de dirección

Período de garantía: 3 años50.000 años / 30.000 kilómetros

Zhejiang, China

Tamaño: tamaño estándar del OEM

Tipo de vehículo:

Buick auto Brand

COLOR: Blanco, negro o Personalizado

Materiales: aluminio fundido

Número mínimo de pedidos: 51

Embalaje: Cartón / bandeja

Certificado: ISO 16949 / iatf 16949

Fabricante: Ryan United

Capacidad de oferta: 100.000 unidades mensuales

Detalles del embalaje: Neutral

Embalaje: bolsas de plástico interior, cajas de Interior, cajas de cartón, bandejas.

Puerto: Shanghai o Ningbo

Por adelantado:

Quantity(Sets) 1 - 300 >300
Hora del este.Tiempo (días) 45 Por celebrar consultas


Danos un mensaje.